Classic Marysville ConcreteClassic Marysville Concrete

Concrete contractor in Everett, WA - driveways and patios built on a solid base

Classic Marysville Concrete is a concrete contractor based in Marysville, WA. We pour driveways, patios, walkways, steps, garage floors and foundations for homes and small businesses in Everett, from tearing out a sunken slab to cutting a new opening.

Large gray stamped-concrete patio in a fenced backyard, with a shed, trees and outdoor chairs.
  • Licensed and fully insured.
  • Free quotes on site.
  • Expect a reply within 1 business day.

Everett's older streets and newer neighborhoods

Everett sits just south of us in Marysville, and our jobs here cover a wide range. Closer in, many of the houses are older, with narrow driveways, front steps that meet a porch or a sidewalk, and slabs poured long before the current owners moved in. Toward the south end the neighborhoods are newer, with wider driveways, back patios and garages facing the street, the kind of houses we also pour for in Mill Creek and Mukilteo. Small business owners call us too, for walks, parking and shop floors.

That mix decides how a job starts. On an older house I expect a thin base and steps that have to meet something already there. On a sloped lot, the first thing I want to know is where the water goes when it rains.

Concrete work we do for Everett homes

  • Concrete driveway building

    Older Everett driveways often crack and sink near the garage. We tear out, dig to firm ground, pack a new base and pour a slab that drains away.

  • Concrete patio construction

    Patios on Everett's sloped lots have to shed water away from the house. We set that slope before the pour so water doesn't pool at the door.

  • Stamped concrete services

    Stamped concrete gives an Everett patio or walk the look of stone or brick. The pattern can't hide a slab that settles, so the base comes first.

  • Concrete sidewalk building

    Walkways beside older Everett houses get lifted by roots and washed out by downspouts. We replace broken sections and slope the new ones so water runs off.

  • Garage floor concrete

    Garage floors in older Everett homes are often cracked and uneven at the door. We break out the old slab and pour one sloped toward the opening.

  • Decorative concrete

    Color or a finish with the stones showing suits an entry where looks matter. I'll tell you which ones stay grippy on Everett's steep walks.

  • Concrete retaining walls

    Plenty of Everett lots step down toward the street. A concrete wall holds that ground back, with drainage behind it so water doesn't push it over.

  • Concrete floor installation

    Shops, basements and outbuildings in Everett need a floor that's flat and dry. We pack the base, lay plastic to block ground moisture and trowel the floor smooth.

  • Concrete pool decks

    Everett backyards with a pool need a deck that drains away from the water and keeps its grip when wet, so we pick the finish for that.

  • Concrete steps construction

    Front steps on older Everett houses often have to meet a porch or walk that has settled. We work out the heights so each step comes out even.

  • Slab foundation building

    A slab foundation suits a garage, shop or addition on an Everett lot. We dig to firm ground, compact the fill and set the steel before the pour.

  • Foundation installation

    New additions and outbuildings in Everett need foundations that match the ground they sit on. We check the soil and slope before saying what it needs.

  • Concrete parking lot building

    Small Everett businesses need parking that handles daily traffic and drains where it should. We build the base and slab for heavier loads than a driveway.

  • Concrete footings

    Decks, porches and posts on Everett's sloped yards need footings dug to firm ground. We dig, form and pour them so the weight rests on solid soil.

  • Foundation raising

    When a corner of an older Everett house has dropped, we look at why before lifting it. Raising it without fixing the cause usually means it drops again.

  • Concrete cutting

    Older Everett houses sometimes need a new basement doorway or a trench through the slab. We saw-cut clean edges so the concrete around it stays sound.

Get a free written estimate for your Everett job

We'll reply within one business day to set a visit. I come out, measure and ask what you need, then send a free written estimate showing what's included and what isn't, with no obligation.

(360) 251-0089
Based in
Marysville, WA 98270
Hours
Mon–Fri: 7 AM–9 PM, Sat–Sun: 6 AM–9 PM

Working in Everett: permits, licenses and price

In Everett, Permit Services handles construction permits, and the city wants one for most work unless its code exempts it. The type of permit depends on what you're building. If your job needs one, the city's review and inspections become part of the schedule, so I'll tell you early whether I expect one and help with the application. If your address turns out to be outside city limits, the county may cover it instead, and I'll sort that out at the estimate. Any contractor working inside city limits also needs a current City of Everett business license, which the Clerk's office processes, so it's fair to ask whoever you hire to show you theirs. We're licensed and fully insured, with satisfaction guaranteed on every job.

What moves the price here is mostly what's under and around the slab. How much old concrete comes out, how much base has to be dug out and replaced, how big and thick the new slab is and how close a truck can get on a narrow street or a steep drive all change the number, and your written estimate shows what's in it and what isn't. The schedule turns on the permit, a dry day to pour and the curing wait, the days fresh concrete needs to harden before you use it. We come down from Marysville for Everett jobs the same way we head out to Lake Stevens and Arlington, so getting our crew here isn't a stretch.

Why Everett driveways and patios crack and pool

  1. A lot of the cracked and sunken slabs we see on older Everett houses were poured on a base that was raked level instead of dug out and packed, so the slab settled as the dirt underneath did. Roots and years of downspout water usually finish the job. When we replace one, we dig down to firm subgrade, the ground the slab actually sits on, and pack a new base in layers before anything gets poured.

  2. On a sloped lot the other problem is water. A slab that falls toward the house sends every rain back at your foundation, so before we form anything I check where the water runs now and set the new slab to carry it away.

How an Everett concrete job runs from call to walk-through

Here's how a job goes from your side, from the first call to the day I walk the finished work with you.

  1. Call or send the form

    Call (360) 251-0089 or send the form, and we'll set a time for me to come out. It helps to tell us your address and what's there now, whether that's an old slab, bare dirt or a slope.

  2. I come out and measure

    I walk the site with you, measure, look at where the water runs and ask what you need the finished job to do, then send a written estimate that lists what's included and what isn't. If something can't be known until the old concrete is out, like the shape of the base underneath, I say so in the estimate instead of guessing.

  3. Permits sorted, then we pour

    Once you say go, we handle any permit questions and fit the review and inspections into the schedule. Our crew forms, pours and finishes the slab with me on site, then cleans up.

  4. We walk the job together

    At the end I walk the job with you and tell you when it's ready to walk on and when it's ready to drive on. If anything doesn't look right to you, that's the time to say so.

Questions about concrete work in Everett

Do I need a permit to replace a concrete driveway in Everett, WA?

Often you do, because the city requires a permit for most construction work unless its code exempts it, and its site work permit covers paving, grading, retaining walls and other work outside the house. Its residential checklist also lists porches and exterior stairs, which matters if your job includes new front steps. The city's permit steps page explains how to apply, and I'll tell you at the estimate whether I expect your job to need one.

Which building codes apply to concrete work in Everett?

Everett uses the International Building Code and the International Residential Code in the editions Washington adopts, along with added sections on grading and on building in flood-prone areas. The city reports that the 2024 state codes have been delayed until May 3, 2027, so the current set still applies for now. On a concrete job, the grading part matters most when we cut into a slope or bring in fill, and we build to what the inspections check.

How much does a concrete driveway cost in Everett?

There's no single price for an Everett driveway, because each one comes down to its size, the tear-out and how much base the ground needs, and your written estimate gives you the figure for yours. A stamped or colored surface costs more than a plain one. If the budget's tight, I'd rather you go plainer on the surface than cut back on the base, because nobody sees the base on day one, but it decides whether the driveway stays flat.

How long before I can drive on a new concrete driveway in Everett?

You can usually walk on a new slab after a day or two and drive a car on it after about a week, though it keeps curing and gaining strength for weeks after that. Driving on it early is how edges chip and cracks start, so parking on the street a few extra days is worth it. Cool, damp weather slows curing, and I'll tell you at the walk-through when yours is ready.

How do I keep a new concrete patio from cracking like the old one?

Start with the base and the joints, because most cracks come from a slab settling on loose dirt or cracking wherever it likes. We pack a firm base, set rebar where the slab needs it so the steel holds the pieces together if a crack opens, and cut control joints, shallow grooves that give any crack a straight line to follow. Concrete still cracks a little, but a crack inside a joint is one you'll barely notice.

What is the best way to pour a driveway on a steep lot in Everett?

The best way is to grade the base to a steady slope, pitch the slab so water runs off it instead of toward the garage, and give it a broom finish, a brushed texture that gives tires and shoes some grip. We take extra care where the drive meets the garage floor and the street, since that's where steep driveways usually crack or scrape the bottom of a car. On a really steep site I also check whether the truck can reach the forms or the concrete has to be pumped in, and that shows up in the estimate.

Marysville, WA

Tell us about your Everett concrete job

A settling slab or a puddle by the foundation usually gets harder to fix the longer it sits, so it's worth having me look before it spreads.