Concrete Contractor in Marysville, WA - Slabs Built on a Solid Base
Classic Marysville Concrete is a concrete contractor in Marysville, WA. We pour driveways, patios, walkways, steps, garage floors and foundations for homeowners, and we take on the awkward jobs, like steps meeting an old slab.
- Licensed and fully insured.
- Free quotes on site.
- Expect a reply within 1 business day.
Marysville homes and the concrete around them
Most of our calls in Marysville come from homeowners, with some small property and business owners, and they usually start with something you can see: a driveway cracked and sunk at the garage, a patio that holds puddles, steps pulling away from the porch. The houses run from older places whose concrete has been patched for years to newer homes where the first slab went in fast with the rest of the build. We do the same work in Arlington and Lake Stevens, but Marysville is where we're based.
On older houses, new concrete usually has to meet a porch, a garage floor or a walk that's already there, and that tie-in takes some figuring. On any lot here, the way the yard slopes and where the water goes decide more about the job than the finish does, so that's the first thing I look at.
Concrete services for Marysville homes and lots
Concrete driveway building
When an older Marysville driveway has cracked, sunk at the garage or holds puddles, we tear it out, rebuild the base and pour a slab that drains.
Concrete patio construction
For a backyard patio that stays level and clear of puddles, we set the slope away from your house so water runs to the yard instead of your foundation.
Stamped concrete services
If you want a patterned patio or walk, stamped concrete gives it the look of stone or brick, and it still needs the same solid base underneath.
Concrete sidewalk building
Older front walks heave and catch toes over the years, so we replace them over a packed base, with joints cut where we want any cracks to go.
Garage floor concrete
A garage floor that's cracked, pitted or sloped the wrong way gets broken out and repoured, so the water dripping off your car runs out the door.
Decorative concrete
When plain gray won't suit your house, we can add color, exposed stone or a different finish, and we'll tell you what upkeep each one needs.
Concrete retaining walls
On sloped Marysville yards, a concrete wall holds back the hill so you get usable flat ground, and we plan the drainage behind it before forming.
Concrete floor installation
For shops, basements and outbuildings, we pour interior floors flat and to the thickness the use calls for, over a base packed in layers.
Concrete pool decks
Around a pool, the deck has to grip wet feet and shed water away from the pool and the house, so the finish and slope matter more here.
Concrete steps construction
New steps on older houses often have to meet an existing porch or slab, and getting every step the same height and the joint solid takes real figuring.
Slab foundation building
For a garage, addition or outbuilding, we dig out, pack the base and pour a slab foundation thick enough for whatever is going to sit on it.
Foundation installation
When an addition or shop needs a foundation under it, we form and pour the footings and walls to the drawings, checking level before the pour.
Concrete parking lot building
For small business and rental properties, a concrete lot needs a heavier base and a clear plan for draining water off all that hard surface.
Concrete footings
Decks, sheds and small additions sit on footings, the concrete pads that carry the weight, and we set them on solid ground so the posts stay put.
Foundation raising
When part of a foundation or slab has settled, we find out why it moved first, then raise it and give it firm support again.
Concrete cutting
Need a doorway in a foundation wall, a trench through a slab or a bad section removed? We saw clean openings, even where nobody has cut before.
Get a free on-site concrete estimate in Marysville
Send the form and we'll reply within one business day to set up a visit. I'll measure and send you a written estimate, and there's no obligation to go ahead.
(360) 251-0089- Based in
- Marysville, WA 98270
- Hours
- Mon–Fri: 7 AM–9 PM, Sat–Sun: 6 AM–9 PM
What to know before concrete work in Marysville
In Marysville, permits go through the city's Community Development department, which takes every permit and planning application on its online permit portal. When your job needs one, we don't set forms until it's issued, so the city's review sets the start date more than our calendar does. Before you hire anyone, check that they're registered with the state Department of Labor & Industries and hold a Marysville business license, which the city requires of any business working inside city limits and which shows up as a city endorsement on the state business license, renewed every year. We're licensed and fully insured.
We take the same crew to Everett and the other cities around Marysville, and the job runs the same way everywhere. The price mostly follows how big the job is, how much old concrete and dirt has to come out and how much base goes back in, and on a long driveway or a tight street it also depends on whether the truck can reach the forms or we have to pump or wheel the concrete in. The schedule turns on the permit, if there is one, and on getting a day the weather allows for a pour.
Why Marysville slabs crack, sink and hold water
Most of the sunk and broken driveways we tear out here failed from underneath. The subgrade, the dirt and gravel the slab sits on, was raked level instead of dug out and packed in layers, so it kept settling and took the concrete with it. On older houses there are often years of patching sitting over a base that was never right. We dig down to firm ground, bring in base rock and pack it before any concrete shows up, because once the slab is down, nobody can fix what's under it without breaking it out.
Water is the other problem we see. A slab that tips toward the house sends rain at your foundation and leaves puddles by the door, so I check where water runs across the whole lot before we set a single form, and we pitch the new slab away from the house.
How a concrete job runs when you call us in Marysville
Here's how a job goes from your first call to the final walk-through, and when it helps to have you home.
Call or send the form
Call (360) 251-0089 or use the form, and tell us a little about the job and your address. We'll set a time for me to come out, and a few photos ahead of time help me come prepared.
I measure and write it up
I walk the site, measure, check where the water goes and ask what you need the finished job to do, so it helps if you're home. You get a written estimate that says what's included and what isn't, so you know what you're paying for before anything starts.
Permit, forms and the pour
Once you say go, we sort out any permit questions first, then our crew forms, lays and packs the base, pours and finishes, with me on site. You don't need to be home on pour day, but keep cars and foot traffic off the area.
Cleanup and the final walk
We clean up, and I walk the finished job with you and tell you how long the slab needs to cure, which is the wait while it gains strength, before you walk or drive on it. Satisfaction guaranteed on every job.
Questions about concrete work in Marysville
How much does a concrete driveway cost in Marysville, WA?
There's no fair number until I've seen the site, because size, thickness, how much old concrete comes out and how much base we have to dig and pack set most of the price. Stamping or color costs more than a broom finish, the light texture that keeps a slab from getting slick, and steps, walls or drainage work add to the total. If the budget's tight, I'd rather cut the finish than the base, since a nice surface over a bad base cracks just as fast and the base is the part you can't redo later.
How do I find out if my concrete project needs a permit in Marysville?
Ask us at the estimate, because I'll tell you early whether a permit may come into your job and which office covers your address, since that can be the city or the county. In the city, grading and clearing permits go through the same online permit portal as other applications. We can help with the application and work to the inspections that come with it.
Does a concrete contractor need to be bonded and insured in Washington?
Yes, state law requires every construction contractor to register with the state and to carry a bond and insurance. The bond is $30,000 for a general contractor or $15,000 for a specialty contractor, and the insurance has to cover at least $200,000 public liability and $50,000 property damage, or $250,000 combined. On any home job of $1,000 or more, a registered contractor also has to give you a written notice to customers, so ask for it if you don't see one.
How do I find out what a flood map says about my Marysville home?
FEMA's Flood Insurance Rate Maps show it, and the county's flood map page covers them. They're the official maps of flood hazard areas and risk zones, and where your property sits on them is one factor in your flood insurance rate. If your house is in a mapped area, tell me at the estimate, because it changes how much attention I give the grade and where water leaves the slab.
What natural hazards affect homes in Marysville, WA?
Snohomish County's emergency management department names earthquake, severe weather, flooding, wildfire and landslides as the natural disasters of greatest concern for the area, ranked by estimated risk to safety and economic damage. For concrete, the ones I think about most are water and slopes, so on a hillside yard or a low spot we talk through drainage and retaining before anything gets poured.
How do I keep a new concrete driveway in Marysville from cracking?
Start with a packed base and good drainage, then cut control joints, shallow grooves that give the slab a planned place to crack, on time, because concrete shrinks as it dries and will crack somewhere. We also avoid pouring in the heat of the day, which can leave a weak, dusty top. No one can promise a slab won't crack, but done this way the cracks tend to stay in the joints instead of running across the middle.
Marysville, WA
Get your Marysville concrete job on the calendar
The sooner I see your site, the sooner you know whether a permit is part of it and what your base really needs.